Discontinued

ANALOG DRUM MACHINE Mode Machines brought again the ADX 1, a powerful 5 channel Analogue Drum Expander with individual outputs, MIDI control and infinite amount of sound tones thanks to its generous amount of knobs to control its parameters. The...

Juno 106 Filter Module I bet you never knew you needed a dedicated Juno 106 Filter?   Well even if you didn't, Mode Machines have made it possible. With Cutoff (12/24dB), resonance (12dB self osc mode) and VCA level, you can run your stuff ...

FairComp - 670 The Faircomp is a very complex Fairchild 670 clone with 20 tubes and 8 transformers, completely made by hand in Germany. The audio path circuit is 100% accurate to the historical model. Each FairComp 670 is made entirely by hand...

Krautrock Phaser The Mode Machines KRP-1 is a 100% true discrete analogue phaser with photo-couplers which design is based on the legendary Compact Phasing A from Gerd Schulte Audio Electronik. This was used in the 70s & 80s by many famous people...

Flight case The Mode Machines MC-1 Mode Case is designed for use with a wide range of desktop devices. To name a few, x0xb0x, SID Desktop, AVR Synth, KRP-1 Krautrock Phaser, SL-1 Synthlab, OBZT Monophonic Bass Synthesizer, VORTEX, ADX-1......

PRODUCT DESCRIPTION The Air-2 W (white version) is a professional Dual Wireless UHF Multi Channel Microphone Set.  It convinces through a  Pick Up Cartridge Transducer that has a wide, linear and dynamic frequency response. A Cardioid polar res...

PRODUCT DESCRIPTION The CM-1 Cameramic is 23 cm long and weighs only 190 grams. The housing is made of sturdy plastic. The receiving unit is made of black aluminum and with the product color it fits perfectly into the Mode Machines assortment. ...

PRODUCT DESCRIPTION The EMM-1 is a desktop retro microphone. It is 16 cm high and weights only 140 grams. The housing is made of sturdy plastic. The base of the microphone is mirrored and black shaded Mode Machines logo adorns the center of ...

PRODUCT DESCRIPTION The MT-58 is a dynamic cardioid microphone. This type of microphone is also often called the legend among the vocal microphones designated. Weighing 375 grams, it is stable and lightweight at the same time. The microphone...

PRODUCT DESCRIPTION Within this set a MT-58 dynamic cardioid microphone (This type of microphone is also often called the legend among the vocal microphones designated) and a K&M 254 Tripod is included. The microphone weights 375 grams an...

MT-8 Large-diaphragm Studio Tube Microphone Modemachines is happy to anounce the MT-8 dual-diaphragm, vacuum tube condenser microphone. Designed as a dedicated vocal microphone, the MT-8 targets engineers ‘with vintage tastes who want high h...

PRODUCT DESCRIPTION The NW-100 is a professional 48V phantom power for condenser microphones that convinces through ultra low-noise audio performance and full-frequency response. The product transfers sound signals to a sound card in a compact,...

PRODUCT DESCRIPTION The PS-1 Popkiller (pop filter) provides with a diameter of Popfilters of 15 cm and a flexible arm (35 cm length) a flexible and adjustable pop filter. The integrated clamp of the PS-1 can be easily attached to any microphone...

PRODUCT DESCRIPTION The microphone ROBIN is a high-end ribbon microphone and has the typical form of a condenser microphone. Of particular note is the fine and excellent sound of the ROBIN high-end ribbon microphone. The package also includes ...

PRODUCT DESCRIPTION The classic shotgun microphoneSG-672 has 27 cm total length and a weight of 200 grams. The receiving unit includes a condenser capsule and offers the user a high-grade sound quality. Through the supplied external power supply...

PRODUCT DESCRIPTION The dynamic cardioid microphone THE-1955 is also known as Rockabilly Microphone and available since 1939 in the worldwide known design. With an overall height of 19 cm and a weight of 624 grams, it is stable and stylishly s...

USB-MIDI to Serial Converter: Mode Machines is proud to present the CerebelUSB, a tiny USB Host which makes possible to convert USB-MIDI Class Compliant devices in to standard MIDI (5 pin DIN conectors). Ideal for any situation where a Laptop or...

PRODUCT DESCRIPTION The CEREBEL USB V2 is the further developed version of the Cerebel USB. The CEREBEL USB V2 has improved hard- and software and is now compatible with more class compliant USB MIDI devices. In general the product is a USB MIDI Host...

PRODUCT DESCRIPTION The DT-300 is a controller which has been adapted to the Alpha Juno 1, 2 and MKS-50 synthesizers.  It offers the complete control over all editable parameters and convinces with the latest technology. It is easy to use...

Programmer for Roland JX3P and MKS-30 The MODE MACHINES DT-200 is the programmer specially designed for the dual- DCO, 6 voice poly- phonic synthesizer such as the JX-3P, MKS-30 and GR-700. It has the same functions as the Roland PG-200. The...

MIDI Arpeggiator The MAP-01 is a highly programmable MIDI arpeggiator, featuring 4 different arpeggio styles. The user friendly interface consists of a function knob and three buttons with LEDs for quick and clear operation, and of course a clear...

PRODUCT DESCRIPTION The NANO MIDI EXTENDER is a MIDI extender that is able to send MIDI data up to maximum 100 meter (from sender to the receiver). To connect the sender and the receiver, the user needs to connect a CAT5-CAT5 cable to both d...

PRODUCT DESCRIPTION The NANO MIDI MERGER V2 is a low latency and intelligent midi merger with midi timing priority. The product has two MIDI IN ports and two MIDI OUT ports. Both midi inputs are opto-isolated. An indicator lamp lights when midi ...

PRODUCT DESCRIPTION The NANO MIDI THRU V2 is a 1-in 3-out low latency MIDI Thru Box with data correction. The product provides additional MIDI Thru ports in a classic MIDI setup. The NANO MIDI THRU V2 will eliminate latency caused by daisy-chaining...

Controller for Prophet 5 Virtual Synthesizers Professor V2 is a USB controller based on the Prophet-5. Control your software plug IN Sequential Circuits Prophet 5 with all controls easily through the professor V2. Plugins like Arturia Prophet...

PRODUCT DESCRIPTION The USB / MIDI INTERFACE is a USB2.0 class compliant midi interface. It is equipped with one midi input and three midi outputs. The interface works fine with Windows XP, Windows Vista, Windows 7, Mac OS X and Linux witho...

Description The D-NOISE is a digital noise generator. Features Basic color of the module is silver in combination with black Only 6HP wide (30mm) and 18mm deep Technical Specifications Dimensions: 12.3 x 3.0 cm x 2.0...

Description The D-ROM of the german manufacturer MODE MACHINES, is a drum module based on samples from the 80's. 8 internal sounds (bassdrum, closed hi-hat, cowbell, clap, open hi-hat, rimshot, snare, tom) of the 80's, developed by the Dutch producer...

Description The MS20-RM is a digital ring modulator based on the MS-20 ring modulator. The trigger levels of X and Y can be set between 0V and 12V or -12 and +12V. The module is only 6HP wide (30mm) and 30mm deep. Features Basic color of...

Description The XOXCILATOR is a VCO based on the TB-303 Oscilators. The module is only 6HP wide (30mm) and 30mm deep.  It works with less than 25mA @12 and -12volt. Features Basic color of the module is silver in combination with ...

WASP Filter Module The MW-01 Wasp Filter is a distortion filter device. It uses the same VCF model as from the EDP Wasp Synth, but ads tweaks and modifications to really bring out the noise! Built into a robust folded aluminum case with a chunky...

Rack Mountable Analogue Filter: The Mode Machines OMF-1 contains: A four pole true analogue filter. This is based on the famous transistor ladder filter developed by Dr Bob Moog in the 1960s. A front panel pot controls the filter cut-off frequency,...

PRODUCT DESCRIPTION The MC-2 Pedalboard-Flight Case belongs to the german manufacturer MODE MACHINES. It is a professional and high quality processed flight case. It convinces in the outward look through a simple, silver design. Reinforced corners ...

PRODUCT DESCRIPTION The MM-1 is a guitar/bass-effect pedal with a main focus on distortion.  Through separate knobs for tone, distortion and level you can get the best tune for every situation. In the standard mode it delivers an undulating e...

PRODUCT DESCRIPTION The MM-2 is a guitar/bass-effect pedal with a main focus on overdrive sound. With the two built in knobs for emphasizing the lowest octaves and adding more brilliance and crispness to the fundamental string frequencies, you ...

PRODUCT DESCRIPTION The MM-3 is a guitar/bass-effect pedal with a main focus on classic fuzz sound. With the built in knobs you can not only choose between "Bass BUZZ" which sounds like the old germanium transistor Fuzz Face and the more trebly...

PRODUCT DESCRIPTION The MM-4 is a guitar/bass-effect pedal with a main focus on Chorus. With the built in knobs you can set the sensitivity how hard you have to hit the string in order to produce a modulation voltage from the envelope circuit, ...

PRODUCT DESCRIPTION The MM-5 is a guitar/bass-effect pedal with a main focus on delay. With the built in knobs, there are plenty of different settings you can adjust. Aside from the level of delay effects and the feedback from the delay effects ...

PRODUCT DESCRIPTION The MM-6 is a phaser effect pedal, which works with guitars, bass,  keyboards and even vocals. With the built in knob you can control the overall effect rate and an easy to access on/off switch lets you simple change the ...

PRODUCT DESCRIPTION The MM-7 is a guitar/bass-effect pedal with a mainfocus on compression. With the built in knobs you can adjust the output volume, the tone of sound and the intensity of compression. By narrowing the dynamic range of a signal,...

PRODUCT DESCRIPTION The MM-8 is a guitar/bass-effect pedal with a main focus on flanging. With the built in knobs you can not only adjust the feedback of the flanger note (up to an oscillator noise tone), the limit range of sweeping scope and ...

PRODUCT DESCRIPTION The MM-9 is a central power supply for effect pedals. Due to the eight built-in 9 V outputs, each with max. 300 mA and a 12V DC input Maintains the power supply with positive functions. Each input has a status LED. The set ...

PRODUCT DESCRIPTION The SP-1 is a universal sustain pedal. The pedal design is held in a matte black. The pedal itself is shiny, silvery. At the top it carries the MODE MACHINES logo. The switch on the right side is clearly visible. Four knob ...

VST Host - Virtual Pedal Board: Mode Machines is happy to announce the vPed. The ultimate VST and VSTi  Host for live or studio use. The power and versatility of VST /VSTi at your feet. vPed currently ships in two flavours, Standard Version ...

List of compatible plug-is by Vendor: 2C Audio: - B2 - Aether - Breeze Audio Damage: - EOS BBE: - D82 Sonic Maximizer - H82 Harmonic Maximizer - L82 Loudness Maximizer Cytomic: - The Glue D16 Group: - Phoscyon. VSTi (TB 303...

  4Front <www.opensound.com > 4fbass – VSTi (VST Instrument) 4fepiano – VSTi (VST Instrument) 4fpiano – VSTi (VST Instrument) 4frpiano – VSTi (VST Instrument) Truepianos – DEMO –VSTi (VST Instrument)   ...

PRODUCT DESCRIPTION Say hello to the Mode Machines Retrophones. Old School Headphones and microphone set, with a stylish design, that resembles an elegant mix betwen retro and modern look, delivering at the same time a very modern sound. The RP-1...

SID Desktop Synthesizer: Mode Machines have done it again. We have taken something that everyone wants, but can't get and made it available. The SID sound is now available to everyone. Using this Groovebox you can easily start creating that chip ...

The SL1 Synthlab uses a 100% true analog circuitry with subtractive synthesis which is designed in a classic way. This type of design started in the early 1970´s with voltage-controlled modular systems. The use of the low pass filter based on the ...

Rack version of Roland 303 clone The x0x-Rack 19" Rackmountable TB-303 Clone from Mode Machines features wave, tune, auto-tune, cutoff, resonance, envelope modulation, accent, decay and volume adjustable controls on the front panel. Features...

x0xb0x = Synth + Sequencer The x0xb0x is not just another MIDI-controlled TB-303 clone. x0xb0x is a full reproduction of the original Roland synthesizer, with fully functional sequencer. The sequencer can be programmed just like the original 303...

x0xb0x = Synth + Sequencer The x0xb0x is not just another MIDI-controlled TB-303 clone. x0xb0x is a full reproduction of the original Roland synthesizer, with fully functional sequencer. The sequencer can be programmed just like the original 303...